Knit = Machine enemy

Last night while I was sitting at my sewing machine contemplating why it hates Knit material sew much, I thought I should start logging the music I listen to. Yes, that was one of those thoughts that came out of the blue. I don't pick music to sew to, I pick music to fit my moods. Last nights playlist
Pentaphobe- Sawdust
Queen of the Damned Soundtrack I'm not sure if I have the explicit version or what. I bought the soundtrack like within months of the movie coming out.
12 Tales-Various Artists



It never fails, my machine just can not stand anything that has more than a slight stretch to it, especially knits. It's okay with some of the cotton fabrics that have a bit of give to it. I thought I was humming along nicely but low and behold, nope. I don't know how many times i've ripped thread out because of the HUGE gap of missed stitches. I pulled out the manual and read over it several times. I took all the suggestions, make sure using correct needle size for material, change needle to new and sharp, adjust top tension thread, adjust pressure foot, adjust bottom tension, check stitch width and so on. I've done all of those things and still skipping some serious stitches. I wanted to wear the shirt in public, like to work, but nope, not gonna happen. UGH! I should know all this, everytime, never fails, knit + my machine= knit fail. I think I might pull out the other machine and give it a go with knit and see how it reacts as well as making sure it works. I have yet to plug in the other machine and test it. Maybe it's not just my machine, maybe it's all the Sears Kenmores. I'm not going to do anything more with this shirt. It was a good practice run and I made a few more adjustments to my pattern, like lowering the neck about 1/2 inch and I need to lower the arm holes by a 1/4 to 1/2 inch as well, for just a smidge more room. I also need to widden the shoulder some, about 1/4 inch. I added a strip of gathered knit material to the front like a flounce, it'a about 4 inches wide. Next time I decide to do a shirt like this, which I will because I have several other knits I wanted to use, I will try to use my alien ruffler foot attachment.





How come it seems I use more material(i do) to make a copy of a shirt than the actual shirt? The other shirt fits me fine and it's not even a knit material, it's some kind of blend material cotton/polyester I think.




I've finished all the little pattern weights that I made. I can't wait to use them on my next project. I found a couple of my floral sew on embellishments and glued them to the top to give them a little more interest. They are very plain right now. 1 of those PW's has 6 ball bearings from a vehicle, well cleaned of course. The bearings I believed are called hub bearings, they are part of what keeps the wheels turning. Ask my hubby he's more technical when it comes to car talk. I know it, just not all the correct lingo, I just know what it does and where to find it, most of the time.




Here is a quick shot of how I reinforced the top edge of the tapestry that we have hanging on the wall. It's actually one of those printed throws, we decided to hang it up instead. I took it down to wash it and noticed that small holes were forming where it was tacked at. It's a relatively heavy piece to be hanging by a few tacks and i'm suprised that the holes weren't bigger because of it's own weight or the cats trying to climb it. I wished I had black felt but I didn't and I really didn't feel like trying to dye the felt so I left it as is, besides, it's on the back side. I cut the felt in 1 and half (1.5") inch strips and then sewed the strips end to end till I had a long enough piece to reach from one side to the other. I zigzagged stiched the top of the felt and the straight stitched the bottom of the felt. I have yet to hang it, i'm short. I need to pull the couch out and stand on the back of it or get the step chair which is taller and use that. I just don't want to pull the couch out but I probably should to do the cat toy round up.





I love Halloween. I have Halloween decorations that never get put up. I have skulls hanging around all over. LOL! I think Skelanimals are to darned cute! I saw this in the Halloween fabric section and just had to have a piece. I think i'm going to make a bag and a shirt using a hand drawn picture and applique techinque for Halloween. I also think I want some more of this fabric, as well as this totally awesome skull fabric that was there in the same section.

It's in the Bag Baby!

I finished my bag. I have 4 pieces of fat quarters that look identical except for the dye lots. One set is lighter than the other set. I bought the FQ's (fat quarter) at Big Lots for a buck a piece. I love this retro looking fabric. I did have ideas to make 2 matching pillows out of this material for my couch but decided I needed a new bag instead. I'll probably make the other 2 FQ's into a pillow or who knows, maybe another bag since I have 2 handkerchiefs left as well. I was up till about 2am working on this bag. I didn't mean to be up that late but I was so close to finishing that I just had to finish it. I'm really proud of this little bag, mostly because the little square X design to hold the straps came out very neat and pretty without me having to mark sewing lines.

I decided to line my bag after I found a 4pk of army brown, military issued, handkercheifs, while searching for suitable strap material. The handkercheifs are my hubbys from his time in the military so they've been floating around the house for the past 9yrs. Hubby and I will be celebrating 9yrs on the 28th of this month. I wanted to have something made, something celtic for him as an anniversary gift but i've run out of time it seems. I'll have to figure something out.

Here are the pics








Supplies:
2 prewashed Fat Quarters from Big Lots
2 Military issued handkercheifs from hubby right out of the unopened package
1 long slightly stretchy cotton/polyster strap
1 single fold bias tape to match strap- ironed
Double sided iron on adhesive strip 1/4 inch wide
1 single fold bias tape to match or contrast main fabric- folded in half and ironed
Some slightly used clear stretchy elastic from shirts that had it in the shoulder area to hook on a hanger.


I squared up the handkerchiefs then the FQ's. The FQ part of the bag was bigger than the handkerchief lining, so with the elastic I shrunk the opening of the bag some, then added the lining and then finished with the folded bias tape. For the strap, it had more stretch than I wanted but I needed a strap and this was the only thing in my stash that worked. Oddly enough, I don't have many items for making straps for bags, I must remedy that problem. I think I need to make a trip to Joanns soon. I ironed the strap and singed the cut ends with a lighter. I then ironed the adhesive strip right down the center. I ironed out the creases on the bias tape and then ironed it to the center of the strap using the adhesive to hold the bias tape to the strap while sewing the edges down. I still have a bit of stretch in the strap but not nearly as much. The bags edges are encased to give them more durabilty and strength. The linging of the bag is straight stitched and then with tiny close zigzag stitching directly over the stratight stiched line. I think the fabric will rip before the stitching does. I thought about adding a pocket but decided that I really didn't need it. I had the original idea to make it a grocery bag, for those quick trips into the store, now it's just a tag along bag that I carry my lunch and other odd things in to work.


I sewed a few other things in between working on the bag. I worked a bit more on the knit shirt, got the side seams done up, now to do the hemming. With some scraps from the shirt I made little pattern weights. I'd been using some of those large metal fishing weights (3/4oz) in their baggies to help hold things down but wanted something a little nicer. I took the lid from the kitty treat container, made several circles, stitched them together, leaving an opening, and filled them with rice. The rice by itself isn't all that much weight so I took 2 of the fishing weights and shoved them inside with the rice and stiched it closed. WOOOHOOO! I currently have 2 completely done and 2 waiting for the opening to be stitched up. I was thinking they needed a little bit of something on them to make them pretty, like maybe a embroidered simple flower, a crystal, beads or well anything simple to give them a lil more pop.

Fabric Squared

I'm so glad today is friday. I'm hoping to start a new project this weekend, quilting. I'm going to start off with simple, like a grocery bag and pillow. I found this awesome Celtic Quilt pattern that I really really wanna do for the hubby. They call it a stained glass effect, piecing. I still plan on working the shirt pattern as well. I plan on finishing that up this evening so I can cut another of the pattern. I plan on working on the quilting when i'm not feeling the love for working on the shirt.

I've always wanted to do a quilt. I've got lots of material that I accumulated over the years for doing a quilt. At one time I even culled the collection and tried to sell the material for someone else to use, no bites. So now once again I have this urge to make a quilt and i've pulled out the culled material I wan to start with, looks like it'll be reds. I have some other fabrics i've already started cutting into 4.5 inch squares.

So right now i'm kinda playing around with bits and pieces of fabrics and some scraps that were big enough to make what i'm calling Crazy Squares. I think somewhere in my fabric blackhole, there is a quilt square that is in serious need of restitching. Nothing lined up like it was supposed to, it was all off, especially right at the center. I think that actually put me off for a bit on quilting and then of course other interests decided to take precedence. So here it is probably close to 10-15yrs later and i'm ready to try again.

Crazy squares consist of bits and pieces of scrap fabric somewhat put together to eventually make a piece large enough to cut into a 5 inch square. I plan on taking these crazy squares(scraps) and stitching them to the center of a few canvas shopping bags I have planned. I'm practicing my stitching and finding out the pressure I need for feeding it through the machine as well as learning to use my iron more often than just sporadically. My iron has become my new best friend. I used to use the iron only for straightening out folded fabric or a much needed shirt to be smooth instead of the surface of a raging ocean. I have an applique iron and it works great for the smaller pieces of fabric and ironing their seams.

I took some of my smaller pieces of fabric and cut as many 4.5 inch squares as possible and with some light mauve colored gingham and a deep burgandy color solid fabric, I had enough squares to make a 9 patch square and still had 6 squares left over, mostly the gingham. I stitched my squares together and was so proud of how close all the seams matched up. One of the ideas I had was to make a piece from the 4.5 inch squares that was 6 squares across and 6-9 squares high, that's just a guesstimate. I had the idea of making a baby changing mat. Why? I have no idea why considering I don't even know anyone who is having a baby or anyone that has a young child that is still in diapers. I figured that would be simple and functional instead of some kind of wall hanging sampler. I could always sell it or donate it, depending on how the idea manifests. Sometimes I get an idea and it never makes it to reality, sometimes it evolves before manifesting to the physical realm.

Guess I better go practice some more and do more research on quilting techniques for that Celtic quilt I really wanna do for my hubby.